Amplificator integrat Music Hall a70.2
9.999,00 lei
A70.2 este cel mai puternic amplificator integrat Music Hall, impresionează prin corpul său și uimește prin delicatețea sa, fiind orientat în primul rând către iubitorul de muzică.
Technical Specifications:
Power: 2 x 125W/8Ω, 2 x 180W/4Ω
Minimal impedance: 2Ω
S/N: > 100dB
Frequence range: 10Hz-30kHz ±0.5dB
Distortion (THD+N): <0.008(1kHz)
Twin powered (Dual-Mono construction)
Preamp output + tape monitor output
3 x analog RCA Inputs
1 x Headphone output at the front
A/B speakers out
Gorgeous slim-line remote control
Dimensions (H x W x D): 15.4 x 43 x 40.5 cm
Weight: 18 kg
Colors: black, silver
Trebuie să fii autentificat pentru a publica o recenzie.
Produse recomandate
-
6.499,00 lei
Dezvoltat de echipa din Marea Britanie Roksan Attessa oferă aceeași performanță de top ca și amplificatorul de streaming, dar fără conexiune BluOS. Un amplificator puternic care furnizează 130 W pe canal (4 ohmi) și un DAC de înaltă performanță.
Garanţie: 24 luni
Technical Specifications:
Power Output into 8 Ohm
80W Both Channels Driven, Nominal (THD+N <0.1%)
Power Output into 4 Ohm
130W Both Channels Driven, Nominal (THD+N <0.1%)
Inputs (Digital)
Digital 1 (D1) – Coax SPDIF (up to 192kHz/24bit)
Digital 2 (D2) – Optical SPDIF (max. 96kHz/24bit)
Digital 3 (TV) – Optical SPDIF (max. 96kHz/24bit)
Digital 4 (CD) – Coax SPDIF (up to 192kHz/24bit)
Digital 5 (Bluetooth) – Bluetooth (48kHz/16bit)
Inputs (Analogue)
A1 – No signal sense
A2 – With signal sense & used for AV Mode
MM (Phono) – RIAA (equalised)
Outputs
1x pair Speaker binding posts (L&R)
1x pair of RCA Analogue (Pre-out/SUB)
3.5mm Stereo mini-jack headphone socket – 7.5Vrms drive suitable for all headphone types including high-impedance
Other
IEC mains power socket (3 pin)/Fuse holder
3.5mm mini-Jack – 12v trigger Input (On / Standby)
IR wired input 3.5mm jack
Construction
Formed Plated steel and bespoke machined anodised aluminium front panel.
Primary Interface (on unit)
Dynamic Control Dial (with haptic feedback) to control volume and inputs
Secondary Interface (on unit)
Standby, Backward, Play/Pause, Forward
Other Interface
IR remote
Bluetooth
A2DP Audio profile /
Codecs – SBC, aptX & AAC
Bluetooth Range – 15m (typical)
Digital Coax Input
up to 24bit/192kHz PCM
Digital Optical Input
up to 24bit/96kHz PCM
MaestroUnite
System Creation and Control
Advanced System Setting
Over the Air Updates via Wi-Fi
Mains Transformer Rating
400VA
Dimensions (Including Encoder and Connections (W x H x D))
432 x 76 x 373 mm
Dimensions (Excluding Encoder and Connections (W x H x D))
432 x 76 x 346 mm
Weight
10.37 kg (22 lb)
Attessa Integrated Amplifier ManualAmplificator integrat Roksan ATTESSA
6.499,00 lei Adaugă în coșPrevizualizare -
4.399,00 lei
Rega BRIO este fără dubii unul dintre cele mai bune amplificatoare din lume, datorită excelentului raport dintre calitate şi preţ. Atent proiectat, construit solid şi cu piese de calitate, Rega BRIO oferă extrem de uşor un sunet bogat şi transparent în toată gama de frecvenţe.
Garanţie: 24 luni
Technical Specifications:
Power Output: 50 W into 8 Ω
Power Consumption: 195 W
Inputs: 1 x Phono input, 4 x Line inputs
Outputs: Record out
Dimensions (W x H x D): 345 x 78 x 216 mm
Weight: 5.1 kg
Brio User Manual .PDFProdus în stoc
Amplificator integrat – Rega BRIO
4.399,00 lei Adaugă în coșPrevizualizare -
9.999,00 lei
Rega Elicit-R este proiectat şi fabricat în Anglia la cele mai înalte standarde, fiind un amplificator în clasă A cu performanţe audio deosebite, incluzând un preamplificator complex pentru doză MM de înaltă calitate, dar rămânând în același timp un echipament simplu de utilizat și ușor de configurat. Ca atuuri principale acest amplificator prezintă un sunet puternic, foarte dinamic, precis şi detaliat, este versatil din punct de vedere al conectivităţii, are componente electronice selectate atent şi o construcţie robustă.
Garanţie: 24 luni
Technical Specifications:
Power Output: 105 W per channel into 8 Ω / 127 W per channel into 6 Ω
Input Sensitivity: 105 W into 8 Ω
Line Inputs (Input 1 switch set to line): 196 mV load 10 k
Phono (Input 1 switch set to phono): 2 mV load 47 k in parallel with 220 pF
Record Output: 196 mV for rated inputs
Pre-amp Output: 760 mV for rated inputs
Dimensions (W x H x D): 432 x 82 x 340 mm
Weight: 13 kg
Elicit-R User Manual .PDFProdus în stoc
Amplificator integrat – Rega ELICIT-R
9.999,00 lei Adaugă în coșPrevizualizare -
12.999,00 lei
Roksan Caspian M2 este un amestec sofisticat de componente ce se ascunde în spatele unei fațete din aluminiu turnat sub presiune, cu un aspect unic. Un transformator toroidal de 350 VA cu zgomot ultra-scăzut pentru amplificare și un transformator mult mai mic de 60 VA care alimentează preamplificatorul, asigură livrarea în cele mai bune condiţii a 85W/canal pe 8Ω sau 125W/canal pe 4Ω. Amplificatorul Caspian M2 are șase intrări, inclusiv două perechi de ieșiri preamplificatoare şi o conexiune XLR compatibilă cu CD player-ul Caspian M2.
Garanţie: 24 luni
Technical Specifications:
Amplifier Type: Class-AB
Inputs: RCA, XLR
Input Impedance: 38 kohms
Input Sensitivity: 240 mV rms
Output: Speakers (L & R), RCA, XLR
Power Output (Per Channel): > 85 W (8 ohms) / > 125 W (4 ohms)
Power Supply: 350 VA Power Amplifier / 60 VA Ultra low noise Toroidal transformer / Pre-amplifier section toroidal
Frequency Response: -3 dB, <3 Hz – >100 kHz
Gain: 31.6 dB
Harmonic Distortion: <0.005 % 1 kHz – 8 ohms
Signal to Noise Ratio: 100 dB (ref. 900 mV)
Power Source: 220 V – 240 V 50 Hz / 60 Hz // 100 V – 120 V 50 Hz / 60 Hz
Power Consumption: Standby: 5 W Full power / 2 channels: 8 ohms = <330 W / 4 ohms = <550 W
Dimensions (W x H x D): 432 x 80 x 330 mm (incl. feet)
Weight: 9.5 kg
Caspian Power Amplifier Manual.PDFAmplificator integrat – Roksan CASPIAN M2
12.999,00 lei Adaugă în coșPrevizualizare
Recenzii
Nu există recenzii până acum.