Amplificator integrat Music Hall a15.3

Produse recomandate

• 

  

  

  

  Amplificator integrat Roksan ATTESSA

  6.499,00 lei

  Dezvoltat de echipa din Marea Britanie Roksan Attessa oferă aceeași performanță de top ca și amplificatorul de streaming, dar fără conexiune BluOS. Un amplificator puternic care furnizează 130 W pe canal (4 ohmi) și un DAC de înaltă performanță.
  Garanţie: 24 luni
  Technical Specifications:
  Power Output into 8 Ohm
  80W Both Channels Driven, Nominal (THD+N <0.1%)
  Power Output into 4 Ohm
  130W Both Channels Driven, Nominal (THD+N <0.1%)
  Inputs (Digital)
  Digital 1 (D1) – Coax SPDIF (up to 192kHz/24bit)
  Digital 2 (D2) – Optical SPDIF (max. 96kHz/24bit)
  Digital 3 (TV) – Optical SPDIF (max. 96kHz/24bit)
  Digital 4 (CD) – Coax SPDIF (up to 192kHz/24bit)
  Digital 5 (Bluetooth) – Bluetooth (48kHz/16bit)
  Inputs (Analogue)
  A1 – No signal sense
  A2 – With signal sense & used for AV Mode
  MM (Phono) – RIAA (equalised)
  Outputs
  1x pair Speaker binding posts (L&R)
  1x pair of RCA Analogue (Pre-out/SUB)
  3.5mm Stereo mini-jack headphone socket – 7.5Vrms drive suitable for all headphone types including high-impedance
  Other
  IEC mains power socket (3 pin)/Fuse holder
  3.5mm mini-Jack – 12v trigger Input (On / Standby)
  IR wired input 3.5mm jack
  Construction
  Formed Plated steel and bespoke machined anodised aluminium front panel.
  Primary Interface (on unit)
  Dynamic Control Dial (with haptic feedback) to control volume and inputs
  Secondary Interface (on unit)
  Standby, Backward, Play/Pause, Forward
  Other Interface
  IR remote
  Bluetooth
  A2DP Audio profile /
  Codecs – SBC, aptX & AAC
  Bluetooth Range – 15m (typical)
  Digital Coax Input
  up to 24bit/192kHz PCM
  Digital Optical Input
  up to 24bit/96kHz PCM
  MaestroUnite
  System Creation and Control
  Advanced System Setting
  Over the Air Updates via Wi-Fi
  Mains Transformer Rating
  400VA
  Dimensions (Including Encoder and Connections (W x H x D))
  432 x 76 x 373 mm
  Dimensions (Excluding Encoder and Connections (W x H x D))
  432 x 76 x 346 mm
  Weight
  10.37 kg (22 lb)
  Attessa Integrated Amplifier Manual

   

  -

  Cantitate Amplificator integrat Roksan ATTESSA

  + Adaugă în coș
  

  Amplificator integrat Roksan ATTESSA

  6.499,00 lei Adaugă în coș
  Previzualizare
• 

  

  

  

  

  Amplificator integrat Roksan K3

  7.699,00 lei

  Amplificatorul integrat K3 de la Roksan livrează o putere de ieșire de 140 W (RMS) pe canal (în 8 ohmi) şi creează o scenă largă şi detaliată, oferind o experiență muzicală cu adevărat captivantă. O intrare phono Moving Magnet încorporată şi intrările cu cinci linii îl fac flexibil pentru toate tipurile de surse audio.
  Garanţie: 24 luni
  Technical Specifications:
  Amplifier Type: Class-AB
  Input: 5 x RCA, MM phono, Bypass
  Input Impedance: 47 kohms
  Line Input Senstivity: 440 mV @ 140 W / 8 ohms
  Outputs: Speaker (L & R), pre-amp, 3.5 mm headphone
  Power Output (Per Channel): > 140 W (8 ohms) / > 220 W (4 ohms)
  Power Supply: 550 VA Toroidal transformer
  Frequency Response: <3 Hz – >100 kHz (-3 dB)
  Gain: 37.5 dB (75x)
  Harmonic Distortion: <0.005 % (1 kHZ – 14 W @ 8 ohms)
  Power Consumption: Full Power 2-CH: 8 ohms = <330 W, 4 ohms = <550 W
  Signal to Noise Ratio: >90 dB (Line input)
  Dimensions (W x H x D): 432 x 102 x 380 mm
  Weight: 13.5 kg
  Roksan K3 Amplifier Manual.PDF

  -

  Cantitate Amplificator integrat Roksan K3

  + Adaugă în coș
  

  Amplificator integrat Roksan K3

  7.699,00 lei Adaugă în coș
  Previzualizare
• 

  

  

  

  

  Amplificator integrat – Synthesis ROMA 510AC

  25.999,00 lei

  Vino să-l asculţi în showroom!
  Acest amplificator de înaltă performanță, cu sunet detaliat, delicat şi dinamic, scoate imediat la iveală faptul că este construit cu cele mai bune componente, fiind creat de cei obsedați de un sunet excelent pentru cei care iubesc muzica de calitate.
  Garanţie: 24 luni
  Technical Specifications:
  DC Powered tube heater
  All tubes, except KT88/6550, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum.
  Output transformer
  The Output transformer uses a Hi-Grade lron-Silicon for superb frequency reproduction & width. With this newly designed custom output transformer we are able to achieving a highly delicate & precise sound reproduction faithful to the originai recording.
  Mechanical chassis construction
  The power supply & output transformers are held by an extremely rigid structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes.
  Remote control
  It has a soft button design, perfectly matching the aesthetics for the “ROMA” series. It controls volume,mute and sources selection.
  Feet
  Four aluminium feet with an insert of strong rubber. These rubber feet has been choise to minimise vibrations of the amplifier in isolation from its surroundings.
  Binding posts
  Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.
  Sockets
  Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.
  Components
  Components for the Roma 510AC have been selected with great care throughout. Only the best available components are considered & all must undergo an exhaustive analysis of their sonic influence prior to final selection.
  Selected tubes
  All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process & at the end of this, selects the perfect tubes which are then matched for a perfect balance.
  Roma510AC  .PDF

  Produs în stoc

  -

  Cantitate Amplificator integrat - Synthesis ROMA 510AC

  + Adaugă în coș
  

  Amplificator integrat – Synthesis ROMA 510AC

  25.999,00 lei Adaugă în coș
  Previzualizare
• 

  

  

  

  

  Amplificator integrat hibrid 12W A Class – Synthesis SOPRANO

  7.499,00 lei

  Soprano este un amplificator integrat oarecum minimalist, cu un preamplificator solid-state și un etaj final de 12W A Class care utilizează tuburi EL84. Proiectată şi produsă de italieni, micuţă şi elegantă, realizată fără compromisuri, având incorporat chiar şi un convertor digital-analog, această bijuterie electronică poate satisface cele mai rafinate gusturi în materie de sunet.
  Garanţie: 24 luni
  Technical Specifications:
  USB Input
  Optical Input Coax Input
  Line Input
  Phono Input (MM) Ground
  Power stage (1 ch.): Matched pair EL84/6BQ5
  Input stage (1 ch.): Hi Performance audio OP-AMP JRC4580
  Driver (1 ch.): Matched pair MJD340 (Designed for audio amplifier)
  Input impedance: 100Kohm
  Input sensitivity: 100mV RMS for rated power
  Output tap: 6 Ohm
  Power stage config.: Push-Pull Ultra Linear 43% tap
  Power output: 12W RMS into 6 ohm A Class
  Power Bandwidth: 15Hz to 50KHz – 3,0dB
  Frequency response: 20Hz to 20KHz – 0,5dB
  Distortion: 1% @ 1KHz max power (12W)
  Signal/Noise ratio: >90dB A weighted
  230VAC 50Hz -120VAC 60Hz – 80W maximum
  310 x 295 x 150mm (12,2” x 11,6” x 5,9”)
  10,0 Kg (22.0 lbs)
  Synthesis Soprano .PDF

  Produs în stoc

  -

  Cantitate Amplificator integrat hibrid 12W A Class - Synthesis SOPRANO

  + Adaugă în coș
  

  Amplificator integrat hibrid 12W A Class – Synthesis SOPRANO

  7.499,00 lei Adaugă în coș
  Previzualizare