musicon_0001_a15.3-front

Amplificator integrat Music Hall a15.3

4.999,00 lei

Music Hall a15.3 este o opțiune puternică și versatilă pentru cei care doresc să aibă primul lor sistem audio de ultimă generație. Cu un preamplificator cu zgomot ultra-scăzut și un amplificator de curent mare de 50 de wați pe canal, acest amplificator integrat oferă o putere impresionantă care poate conduce majoritatea difuzoarelor de pe piață.
Input Sensitivity: RCA: 330mV
Phono Gain: 1mV (MM)
Power Output: 50W@8ohm 75W@4ohm
Pre Out: 660mV
Signal To Noise Ratio: >90dB THD+N: <0.02%(20Hz-20KHz)
Frequency Response: RCA: 20Hz-20KHz (-0.5dB)
Phono Input: RIAA compliant
Analog Inputs: 6 x line level, 1 x phono
Dimensions (WxDxH): 16.9″ x 14.3″ x 3″ (430 x 364 x 79 mm)
Weight: 14.3 lbs. (6.5 kg.)
Supplied Accessories: Remote, Power Cord, User Manual, 2 x AAA batteries

Categorie: Etichete: ,

Descriere

Recenzii

Nu există recenzii până acum.

Fii primul care adaugi o recenzie la „Amplificator integrat Music Hall a15.3”

Produse recomandate

  • Amplificator integrat – Synthesis ROMA 510AC
    25.999,00 lei

    Vino să-l asculţi în showroom!
    Acest amplificator de înaltă performanță, cu sunet detaliat, delicat şi dinamic, scoate imediat la iveală faptul că este construit cu cele mai bune componente, fiind creat de cei obsedați de un sunet excelent pentru cei care iubesc muzica de calitate.
    Garanţie: 24 luni
    Technical Specifications:
    DC Powered tube heater
    All tubes, except KT88/6550, have DC stabilised heater circuits to reduce hum noise to a near in-audible minimum.
    Output transformer
    The Output transformer uses a Hi-Grade lron-Silicon for superb frequency reproduction & width. With this newly designed custom output transformer we are able to achieving a highly delicate & precise sound reproduction faithful to the originai recording.
    Mechanical chassis construction
    The power supply & output transformers are held by an extremely rigid structure that keeps the unit free from unwanted vibrations which further helps reduce unwanted noise to the tubes.
    Remote control
    It has a soft button design, perfectly matching the aesthetics for the “ROMA” series. It controls volume,mute and sources selection.
    Feet
    Four aluminium feet with an insert of strong rubber. These rubber feet has been choise to minimise vibrations of the amplifier in isolation from its surroundings.
    Binding posts
    Gold plated professional binding posts for a continued oxidisation free connection further improve sound refinement.
    Sockets
    Gold plated ceramic sockets for a continued oxidisation free connection further improve sound refinement.
    Components
    Components for the Roma 510AC have been selected with great care throughout. Only the best available components are considered & all must undergo an exhaustive analysis of their sonic influence prior to final selection.
    Selected tubes
    All tubes used are selected after 2 stage warm up. A fully computer monitored machine controls the process & at the end of this, selects the perfect tubes which are then matched for a perfect balance.
    Roma510AC  .PDF

    Produs în stoc

    Amplificator integrat – Synthesis ROMA 510AC

    25.999,00 lei     Adaugă în coș
    Previzualizare
  • musicon_rs_attessa_ia_rear-1
    musicon_attessa_remote
    musicon_rs_attessa_ia_iso_silver
    musicon_rs_attessa_ia_rear-1musicon_attessa_remote
    Amplificator integrat Roksan ATTESSA
    6.499,00 lei

    Dezvoltat de echipa din Marea Britanie Roksan Attessa oferă aceeași performanță de top ca și amplificatorul de streaming, dar fără conexiune BluOS. Un amplificator puternic care furnizează 130 W pe canal (4 ohmi) și un DAC de înaltă performanță.
    Garanţie: 24 luni
    Technical Specifications:
    Power Output into 8 Ohm
    80W Both Channels Driven, Nominal (THD+N <0.1%)
    Power Output into 4 Ohm
    130W Both Channels Driven, Nominal (THD+N <0.1%)
    Inputs (Digital)
    Digital 1 (D1) – Coax SPDIF (up to 192kHz/24bit)
    Digital 2 (D2) – Optical SPDIF (max. 96kHz/24bit)
    Digital 3 (TV) – Optical SPDIF (max. 96kHz/24bit)
    Digital 4 (CD) – Coax SPDIF (up to 192kHz/24bit)
    Digital 5 (Bluetooth) – Bluetooth (48kHz/16bit)
    Inputs (Analogue)
    A1 – No signal sense
    A2 – With signal sense & used for AV Mode
    MM (Phono) – RIAA (equalised)
    Outputs
    1x pair Speaker binding posts (L&R)
    1x pair of RCA Analogue (Pre-out/SUB)
    3.5mm Stereo mini-jack headphone socket – 7.5Vrms drive suitable for all headphone types including high-impedance
    Other
    IEC mains power socket (3 pin)/Fuse holder
    3.5mm mini-Jack – 12v trigger Input (On / Standby)
    IR wired input 3.5mm jack
    Construction
    Formed Plated steel and bespoke machined anodised aluminium front panel.
    Primary Interface (on unit)
    Dynamic Control Dial (with haptic feedback) to control volume and inputs
    Secondary Interface (on unit)
    Standby, Backward, Play/Pause, Forward
    Other Interface
    IR remote
    Bluetooth
    A2DP Audio profile /
    Codecs – SBC, aptX & AAC
    Bluetooth Range – 15m (typical)
    Digital Coax Input
    up to 24bit/192kHz PCM
    Digital Optical Input
    up to 24bit/96kHz PCM
    MaestroUnite
    System Creation and Control
    Advanced System Setting
    Over the Air Updates via Wi-Fi
    Mains Transformer Rating
    400VA
    Dimensions (Including Encoder and Connections (W x H x D))
    432 x 76 x 373 mm
    Dimensions (Excluding Encoder and Connections (W x H x D))
    432 x 76 x 346 mm
    Weight
    10.37 kg (22 lb)
    Attessa Integrated Amplifier Manual

     

    musicon_rs_attessa_ia_iso_silver

    Amplificator integrat Roksan ATTESSA

    6.499,00 lei     Adaugă în coș
    Previzualizare
  • musicon-roksan-caspian-m2
    musicon-roksan-caspian-m2
    musicon-roksan-caspian-m2musicon-roksan-caspian-m2
    Amplificator integrat – Roksan CASPIAN M2
    12.999,00 lei

    Roksan Caspian M2 este un amestec sofisticat de componente ce se ascunde în spatele unei fațete din aluminiu turnat sub presiune, cu un aspect unic. Un transformator toroidal de 350 VA cu zgomot ultra-scăzut pentru amplificare și un transformator mult mai mic de 60 VA care alimentează preamplificatorul, asigură livrarea în cele mai bune condiţii a 85W/canal pe 8Ω sau 125W/canal pe 4Ω. Amplificatorul Caspian M2 are șase intrări, inclusiv două perechi de ieșiri preamplificatoare şi o conexiune XLR compatibilă cu CD player-ul Caspian M2.
    Garanţie: 24 luni
    Technical Specifications:
    Amplifier Type: Class-AB
    Inputs: RCA, XLR
    Input Impedance: 38 kohms
    Input Sensitivity: 240 mV rms
    Output: Speakers (L & R), RCA, XLR
    Power Output (Per Channel): > 85 W (8 ohms) / > 125 W (4 ohms)
    Power Supply: 350 VA Power Amplifier / 60 VA Ultra low noise Toroidal transformer / Pre-amplifier section toroidal
    Frequency Response: -3 dB, <3 Hz – >100 kHz
    Gain: 31.6 dB
    Harmonic Distortion: <0.005 % 1 kHz – 8 ohms
    Signal to Noise Ratio: 100 dB (ref. 900 mV)
    Power Source: 220 V – 240 V 50 Hz / 60 Hz // 100 V – 120 V 50 Hz / 60 Hz
    Power Consumption: Standby: 5 W Full power / 2 channels: 8 ohms = <330 W / 4 ohms = <550 W
    Dimensions (W x H x D): 432 x 80 x 330 mm (incl. feet)
    Weight: 9.5 kg
    Caspian Power Amplifier Manual.PDF

    musicon-roksan-caspian-m2

    Amplificator integrat – Roksan CASPIAN M2

    12.999,00 lei     Adaugă în coș
    Previzualizare
  • Amplificator integrat 25W Pure A Class – Synthesis Roma 96DC +
    16.999,00 lei

    Roma 96DC + are un sunet complet, aerisit, dinamic, plin de viață şi foarte muzical. Puritatea vocilor umane și acuratețea instrumentelor reci sunt aproape reale. Calităţile sale excepţionale în materie de sunet sunt completate de un phono stage MM/MC precum şi de convertorul digital-analog, ambele având caracteristici unice implementate de producătorul italian.
    Garanţie: 24 luni
    Technical Specifications:
    Power tubes (each ch): 2 X EL34/6CA7
    Tube driver (each ch): 1 X 12AU7/ECC82
    Input: OP/Amp NJM2114
    Output power (each ch): 25W A Class into 6ohm
    Frequency response: 20Hz to 20KHz – 0dB
    Power stage config.: Pentode configuration
    Input impedance (line): 50Kohm
    Sensivity: 300mV for max power
    Distortion: < 1% 25W 1KHz
    Signal/Noise ratio: >90dB (A-weight)
    Frequency response (Phono):
    RIAA stage 20Hz – 20KHz +- 0,5dB
    Gain (MM): 40dB
    Input impedance: 47Kohm
    Controls: Front:
    Infrared receiver, Volume
    knob, Button selection,
    Power button
    Rear:
    Male power socket, RCA
    gold plated connectors,
    Gold plated binding post,
    Gold plated ground connector,
    Protection fuse
    Analogue Inputs (96DC): 3 Line
    1 Phono (MM/MC high impedance)
    Output (96DC): 1 Rec Out
    Analogue inputs (96DC+): 2 Line
    1 Phono (MM/MC high impedance)
    Digital inputs (96DC+): 1 Optical Toslink,
    1 S/PDIF coaxial
    1 USB “B” type Windows / Mac / iOs /
    Android compatible
    Output (96DC+): 1 Rec Out
    Max Resol. (96DC+): 24Bit 192KHz (Optical)
    32Bit 384KHz (USB)
    DSD up to 5,6 Mhz (USB)
    D/A converter: Asahi Kasei AK4495S
    32Bit 768KHz
    Power consumption: 180W max
    Dimensions: (w,d,h) 260x380x200mm
    Weight: 18 Kg
    Remote control:
    Transmitt: Infrared RC5 code
    Function: Volume, Mute, Inputs selction
    Battery: 2 x 1,5V AAA
    Roma96DC +  .PDF

    Produs în stoc

    Amplificator integrat 25W Pure A Class – Synthesis Roma 96DC +

    16.999,00 lei     Adaugă în coș
    Previzualizare